design

Finally found my cheap, dumb CAD program!

Rich Waugh — Sun, 12 Feb 2012 09:03:48 -0600

For years now I've been using an old legacy CAD program to do my mechanical drawings and job sketches, but it won't run on Windows 7 64-bit at all and is badly wonky on 32-bit. Over time I've gotten really comfortable with it and all the other CAD programs I've tried out had too long a learning curve for me, so I had to set up a separate computer just run that old program. Until now.

Shop Plug

IronPhoenix — Sun, 17 Jul 2011 15:39:22 -0500

Been looking at options for advertising my work. Trying to make sales. Especially trying to get my name out there and get people looking at my work. More people I can expose to my craft the better. :)

Ebb and Flow

After7 — Wed, 30 Mar 2011 22:44:08 -0500

Plate steel top and rectangular tube for the square looped legs. Flap-disked the hologram design effect into the top surface. 5'L x 2.5'W x 22"T

Contemporary Coffee Table

After7 — Wed, 30 Mar 2011 20:03:44 -0500

First piece of furniture ('07-'08): contemporary coffee table. Formed mild steel flat stock around wood jig, flux wire welded flats to 4 x 3/16" round tubes, primed and painted black (back then I beli

The rose and the butterfly

gillis — Sun, 04 Jul 2010 14:41:26 -0500

Hi everyone, I've been away for quite a while for personnal reasons but I'm back with My latest creation... I hope you guys will like it...

Lucky Day

eligius1427 — Fri, 18 Dec 2009 22:32:33 -0600

Hi all, Just found out today that two sculpture proposals were accepted for an RFP for a riverwalk up in Yankton, SD. Thought I'd post the proposals.

The Traveler

River Flight

eligius1427 — Fri, 18 Dec 2009 22:30:43 -0600

The Traveler

eligius1427 — Fri, 18 Dec 2009 22:29:49 -0600

salt etching on stainless steel

jalal a.w. — Sat, 21 Nov 2009 12:10:41 -0600

This is 2 of my latest work, I experimented some salt etching for the first time, the results was fantastic, hope you like them.
jalal aw

My new website!

DesignerMetal — Fri, 28 Aug 2009 03:58:46 -0500

Hey guys I just got my website up and running. I would love it if yall would go check it out and let me know what you think (HONESTLY what you think, No hurt feelings here). Its nothing fancy but its a start. The address is http://www.designermetalworks.net table 1: Table commisioned by a boat captain. Made using an actual bronze ship's wheel.The base is steel and was painted to match the natural patina.