dragon

Flame Patina Dragon

peggy — Thu, 17 Apr 2008 08:49:11 -0500

This pendant is made of pierced copper layered over flame patinated copper & attached with silver rivets to a hammered silver base. The hanger is silver tubing 'stitched' with silver wire onto the silver base.

3d Rotations of my various Metal Artwork, including Dragons, Scorpion, Kokopelli and various others.

GoldDragon101 — Tue, 18 Mar 2008 17:38:47 -0500

I would like to invite anyone to visit 3d Rotations of my metal art sculptures. I have been working on these 3d Rotations for quite sometime. Thanks for viewing!

is this the largest galvanized sculpture? Dragon lovers

burningart — Thu, 06 Dec 2007 09:15:58 -0600

Hi all, I just created my second public art sculpture. It was made for the Nashville Children's Theatre. It may be the largest galvanized sculpture... I am trying to figure that out. zophiaburningart.com check out the whole process on the NCT dragon page. this sculpture was made for children and the child in all of us. Z

Destragon - the destroying dragon

QuiQue — Fri, 19 Jan 2007 12:55:31 -0600

"Destragon - the destroying dragon" was created by applying successive oxy-acetylene weld beads over a steel skeletal armature one bead at a time. Over 70 hours of welding were put into this dragon during my initial schooling. What's interesting is that the learning curve is shown in the final dragon. I started with uncontrolled weld beads at the tail of the dragon, and ended with controlled scales at the head. The wings were made of sheet steel with a "buttering" of bronze weld rods over the sheet metal.

My dragon

warren — Thu, 18 Jan 2007 22:01:39 -0600

Dragon by Joshua Pennings

josh — Thu, 11 Jan 2007 01:54:39 -0600

I make sculptures from scrap metal and old tools.
More on http://www.roestsculpturen.nl/english.html
I like to hear your comments.

dragon made from sheet steel

Dean Pesticcio — Sun, 10 Dec 2006 12:45:42 -0600

Hi, I'm new here! This is one of my first peices: a 5 ft dragon made from sheet steel on an 8mm bar frame, galvernized then painted. A smoke machine is rigged through a pipe going under the ground then up underneath the dragon to a 'Y' split at the nose.