eagle

The World Stage

David Lathrop — Sun, 06 Jun 2010 13:09:30 -0500

Eagle #1 Left Side at NightJust a note of thanks to ArtMetal,

Eagle #1 Left Side at Night

David Lathrop — Sun, 06 Jun 2010 13:03:28 -0500

eagle outside

martin1980 — Sat, 09 Jan 2010 16:16:43 -0600

izigimigizi ... Many Ways

Frank Castiglione — Wed, 06 May 2009 12:01:41 -0500

izigimigizi is an integration of Migizi(Bald Eagle)and the human skull. Spirits can be one many ways.The medium is .032" sheet mild steel,hand cut and hand formed.Some folding was utilized forming feathers.In this sculpture, the skull is less stylized while the bird is more stylized,a matter of choice.There is hidden symbolism for you to find.With this effort, greatest growth was realized creating the Eagle head. I tried to give the bird a flow that could only be found with my hands working clay,izigimigizithen transferred to metal.My fingers taught my eyes.

izigimigizi 3-4

Frank Castiglione — Wed, 06 May 2009 12:00:53 -0500

izigimigizi

Frank Castiglione — Wed, 06 May 2009 11:58:08 -0500

eagle front on

martin1980 — Mon, 06 Apr 2009 15:48:29 -0500

eagle overhead

martin1980 — Mon, 06 Apr 2009 15:43:38 -0500

eagle face

martin1980 — Mon, 06 Apr 2009 15:41:36 -0500

Turning Eagle on Munising Bay

Frank Castiglione — Mon, 16 Feb 2009 14:25:20 -0600

In an attempt to grow in my skills as a metal artist I created a wall sculpture of an Eagle turning while in flight.The longitudinal axis of the creature has been altered. The body has been shortened toward the rear, and lengthened in the front. The width of the wing has also been altered being narrow at the base gradually changing to full width at the end.I really appreciate flat art more now.I feel that I was successful with this illusion of depth. I needed a way to have the Eagle "flying out of the wall" while contorting itself, utilizing every body part to make a radical change in direction.The armature was fashioned to replicate the skeleton. The linear nature of the armature made the alterations in lengths doable.The sheet metal components were shaped mostly by stretching. I used a rubber hammer and beat the sheet into a stump. With smaller pieces I had to resort to a metal hammer.Some folding was used making the primary flight feathers. The finish is ground, raw mild steel. Mother Nature will do the rest.