Other Metal Gallery

New chopsticks

Stephen Fitz-Gerald — Sun, 12 Feb 2012 15:29:09 -0600

Three new patterns.
The top is the "Celtic Pattern".
The middle is the "Squiggly Pattern".
And the bottom is the "Twist Pattern".

forged chopsticks

Stephen Fitz-Gerald — Fri, 10 Feb 2012 02:31:50 -0600

Just two of many patterns I produce for stainless steel chopsticks.

Pentacle Box

Stephen Fitz-Gerald — Sun, 29 Jan 2012 19:44:29 -0600

This little box was inspired by The Golden Compass.It is fabricated in 1/8th inch stainless steel.The surface was textured (while flat) with a converted air hammer that I made my own points for.The pentacle pattern inscribed on the surface was cut with a horizontal band-saw (also when the disc was flat) before forming.I made a convex male and female matching die set to form the two halves with a hydraulic press.There is a flat spot on the bottom piece so the box will sit flat and stable.

Crenelated Elliptical Fruit Bowl

Stephen Fitz-Gerald — Sat, 14 Jan 2012 03:50:56 -0600

Fruit bowl in cold formed stainless steel.
Cold formed foot welded up underneath.
Length-15"
width- 12"

Hanging Firebowl

Stephen Fitz-Gerald — Sun, 25 Dec 2011 16:16:56 -0600

Bowl is from an industrial disc harrow and is 38" in diameter.
I had it on a stand for about 10 years but couldn't get the lawn tractor near it.Now that it's hanging i just drive the tractor inside the gazebo and simply push it out of the way.Easy!

Another candlestick

Tom Oldsmith — Fri, 23 Dec 2011 17:17:39 -0600

This is "another candlestick", christmas gift for friends

Why another ?

Because have eyes

material: copper and pink glas

Art Nouveau Wall Vase

Stephen Fitz-Gerald — Sat, 17 Dec 2011 22:03:01 -0600

Wall vase intended to hold cuttings and other plant material in water...

Custom SAT Off-Road Platform

UNKnXfire — Sun, 11 Dec 2011 00:21:11 -0600

Made this for a local Telecom company, design, fab, and test, 2nd one I've made... on the go SAT uplink anywhere in AK!

Woven Pillar Candelabra

Stephen Fitz-Gerald — Wed, 07 Dec 2011 02:40:17 -0600

First Commission from my one-man-show currently going on for the month of December at Risk Press Gallery in Sebastopol,Ca.
I made this today on my day off for a very nice young couple that commissioned me yesterday at the gallery.

Bird on a branch

agate99999 — Thu, 27 Oct 2011 21:43:29 -0500

New to doing repousse and just completed this piece. This is a great hobby and a good way to spend the retirement years just hammering metal.