wire

Copper wire leaf kinetic mobile

| | | | | |
Copper wire leaf kinetic mobile

Copper wire kinetic mobile I made using three different gauges of copper wire and copper flashing


Dark Copper Oak, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Dark Copper Oak, wire tree sculpture

7"H x 5"W x 6"D Created using 24 and 26 gauge solid copper wire. The trunk and the root system are cotaed and will retain a glossy appearance. The branches and the twigs are untreated copper and will darken and petina with age.


Gold Wind Swept, wire tree sculpture

| | | | |
Gold Wind Swept, wire tree sculpture

8" x 8" x 5" Made of 24 Gauge Gold color wire. Planted in a dark blue ceramic rectangular bonsai pot. The tree is on a mound of bonded sea sand and pebbles which have been painted with green and yellow India ink to look like moss covered earth.


Oriental Bonsai, wire tree sculpture

| | | | | | | | | | | | | | | | | | | |
Oriental Bonsai, wire tree sculpture

Wire tree sculpture with hammered leaves. 17" wide x 28" high. Created using 18, 24 and 26 gauge steel galvanized wire. The hundreds of leaves are created by hammering flat every end of every wire, the flattened leaves are then hand painted in several shades of green using enamel paint. The fully exposed root system is set into a beautifully hand painted floral design 7" round ceramic pot. The tree sculpture is permanently bonded into its base using a mixture of mortar, white glue, sea sand, pebbles and small rocks. The sand is painted in shades of green and yellow, using India ink, giving the appearance of a moss setting. This sculpture can be displayed in direct sunlight. All the coloring agents used are light fast, and will not fade.


Coral Wind Swept, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Coral Wind Swept, wire tree sculpture

12" X 11" X 8" Created using 24 and 26 gauge galvanized steel wire. The tree is mounted onto an irregular shaped piece of white coral. The coral is mounted onto a 7 inch square piece of translucient piece of


Cedar on Base, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Cedar on Base, wire tree sculpture

10" X 11" X 8" Made of 24 and 26 gauge galvanized steel wire. The tree
is planted into a brass 4" round top base using sea sand and pebbles.
The sea sand is painted in yellows and greens using India ink to look


Hello, Im new, heres my eagle sculpture

| | | | | |

Hello everyone, this is something ive been working on since last summer. I made it by mig welding 2 - 4mm stainless steel bars together, to create a see through structure that has the look of feathers. I just got it back from electropolishing, and it gleams beautifully, inside and out. The eyes are stainless spheres which i chopped up and mounted. eagle side vieweagle side vieweagle faceeagle faceeagle overheadeagle overheadeagle front oneagle front on


face being built

| | | |
face being built

eagle front on

| | | | | |
eagle front on

Syndicate content