bonsai

Creating Gem, Beaded and Bonsai Wire Trees

| | | | | | | | | | | | | | |
Creating Gem, Beaded and Bonsai Wire Trees

My new book is published...
138 pages, 400 Photos and Drawings, Step by Step Detailed Instructions,
Complete Tool & Material Lists

The book is offered as a PRINTED or DOWNLOAD eBOOK - It's 138 pages and is the result of more than three years of work.


Beaded in Brass Base - Wire Tree Sculpture

| | | | | | | | | | | | | | | | | | | |
Beaded in Brass Base - Wire Tree Sculpture

Beaded in Brass Base - Wire Tree Sculpture
5" x 5"x 4" The tree is made of 24 and 26 gauge steel wire with parts of the trunk rusted to a soft brown color. Woven into the branches are yellow green and white fringe beads. The tree is bonded into a round tarnished brass base using sea sand and small pebbles and a small rock. The sea sand is painted yellow and green India ink to look like moss covered earth.


Winter Bird Nest - Wire Tree Sculpture

| | | | | | | | | | | | | | | | | | | | |
Winter Bird Nest - Wire Tree Sculpture

18"H x 14"W x 14"D
Created using 22, 24 & 26 gauge galvanized steel wire. This piece expresses a promise of spring. The tree is bare with no leaves and a very intricate network of roots. All the color and life is shown in the gold color nest, with the 2 white pearl eggs. The tree sits on a mound made of sea sand many assorted pebbles and rocks. The sea sand and pebbles are painted in yellows, greens and whites, using India ink, which will not fade in sunlight, and gives the appearance of moss covered earth. The piece is planted on an 8 inch round solid wood base, with hand cut openings on the sides. The wood base was made in Japan.


Stone Hearted Eternal Bonsai

| | | | | | |
Stone Hearted Eternal Bonsai

copper wire
obsidian chips
blue tigers eye heart


Dark Copper Oak, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Dark Copper Oak, wire tree sculpture

7"H x 5"W x 6"D Created using 24 and 26 gauge solid copper wire. The trunk and the root system are cotaed and will retain a glossy appearance. The branches and the twigs are untreated copper and will darken and petina with age.


Oriental Bonsai, wire tree sculpture

| | | | | | | | | | | | | | | | | | | |
Oriental Bonsai, wire tree sculpture

Wire tree sculpture with hammered leaves. 17" wide x 28" high. Created using 18, 24 and 26 gauge steel galvanized wire. The hundreds of leaves are created by hammering flat every end of every wire, the flattened leaves are then hand painted in several shades of green using enamel paint. The fully exposed root system is set into a beautifully hand painted floral design 7" round ceramic pot. The tree sculpture is permanently bonded into its base using a mixture of mortar, white glue, sea sand, pebbles and small rocks. The sand is painted in shades of green and yellow, using India ink, giving the appearance of a moss setting. This sculpture can be displayed in direct sunlight. All the coloring agents used are light fast, and will not fade.


Coral Wind Swept, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Coral Wind Swept, wire tree sculpture

12" X 11" X 8" Created using 24 and 26 gauge galvanized steel wire. The tree is mounted onto an irregular shaped piece of white coral. The coral is mounted onto a 7 inch square piece of translucient piece of


Cedar on Base, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Cedar on Base, wire tree sculpture

10" X 11" X 8" Made of 24 and 26 gauge galvanized steel wire. The tree
is planted into a brass 4" round top base using sea sand and pebbles.
The sea sand is painted in yellows and greens using India ink to look


Golden Elm Wire Tree Sculpture

| | | | | | | | | | | | | | | | | | | |
Golden Elm Wire Tree Sculpture

Golden Elm Wire Tree Sculpture
20" X 17" X 17". Made of 20, 26 and 28 gauge gold colored wire. All the leaves on this tree are created by hammering and flattening each wire.
Bonded onto oval dark wood base into mound of aluminum resin.


Exposed Roots - Wire Tree Sculpture

| | | | | | | | | | | | | | | | | | |
Exposed Roots - Wire Tree Sculpture

Exposed Roots - Wire Tree Sculpture
19" X 14" X 14" Made of 26 and 28 gauge galvanized steel wire. Weeping Willow style tree, bonded in sea sand onto a base of 1/2" thick, 7.5" round, clear glass. The sand is painted with India ink to look like moss covered earth.


Syndicate content