artists

Working Title: +1 (sideways)

| | | |


Winter Bird Nest - Wire Tree Sculpture

| | | | | | | | | | | | | | | | | | | | |
Winter Bird Nest - Wire Tree Sculpture

18"H x 14"W x 14"D
Created using 22, 24 & 26 gauge galvanized steel wire. This piece expresses a promise of spring. The tree is bare with no leaves and a very intricate network of roots. All the color and life is shown in the gold color nest, with the 2 white pearl eggs. The tree sits on a mound made of sea sand many assorted pebbles and rocks. The sea sand and pebbles are painted in yellows, greens and whites, using India ink, which will not fade in sunlight, and gives the appearance of moss covered earth. The piece is planted on an 8 inch round solid wood base, with hand cut openings on the sides. The wood base was made in Japan.


Dark Copper Oak, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Dark Copper Oak, wire tree sculpture

7"H x 5"W x 6"D Created using 24 and 26 gauge solid copper wire. The trunk and the root system are cotaed and will retain a glossy appearance. The branches and the twigs are untreated copper and will darken and petina with age.


Oriental Bonsai, wire tree sculpture

| | | | | | | | | | | | | | | | | | | |
Oriental Bonsai, wire tree sculpture

Wire tree sculpture with hammered leaves. 17" wide x 28" high. Created using 18, 24 and 26 gauge steel galvanized wire. The hundreds of leaves are created by hammering flat every end of every wire, the flattened leaves are then hand painted in several shades of green using enamel paint. The fully exposed root system is set into a beautifully hand painted floral design 7" round ceramic pot. The tree sculpture is permanently bonded into its base using a mixture of mortar, white glue, sea sand, pebbles and small rocks. The sand is painted in shades of green and yellow, using India ink, giving the appearance of a moss setting. This sculpture can be displayed in direct sunlight. All the coloring agents used are light fast, and will not fade.


Coral Wind Swept, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Coral Wind Swept, wire tree sculpture

12" X 11" X 8" Created using 24 and 26 gauge galvanized steel wire. The tree is mounted onto an irregular shaped piece of white coral. The coral is mounted onto a 7 inch square piece of translucient piece of


Cedar on Base, wire tree sculpture

| | | | | | | | | | | | | | | | | | | | | |
Cedar on Base, wire tree sculpture

10" X 11" X 8" Made of 24 and 26 gauge galvanized steel wire. The tree
is planted into a brass 4" round top base using sea sand and pebbles.
The sea sand is painted in yellows and greens using India ink to look


My new website!

| | | | | | | | | | | | | |

Hey guys I just got my website up and running. I would love it if yall would go check it out and let me know what you think (HONESTLY what you think, No hurt feelings here). Its nothing fancy but its a start. The address is http://www.designermetalworks.net  Table commisioned by a boat captain. Made using an actual bronze ship's wheel.The base is steel and was painted to match the natural patina.table 1: Table commisioned by a boat captain. Made using an actual bronze ship's wheel.The base is steel and was painted to match the natural patina.


Syndicate content