This is a design that I actually did a few years ago and just finally got around to making one.
It's fun sketching in steel.
The eye and other feather-like things are split out. Height is 24", sticks out from the wall 12"

Three new patterns.
The top is the "Celtic Pattern".
The middle is the "Squiggly Pattern".
And the bottom is the "Twist Pattern".

This little box was inspired by The Golden Compass.It is fabricated in 1/8th inch stainless steel.The surface was textured (while flat) with a converted air hammer that I made my own points for.The pentacle pattern inscribed on the surface was cut with a horizontal band-saw (also when the disc was flat) before forming.I made a convex male and female matching die set to form the two halves with a hydraulic press.There is a flat spot on the bottom piece so the box will sit flat and stable.

Bowl is from an industrial disc harrow and is 38" in diameter.
I had it on a stand for about 10 years but couldn't get the lawn tractor near it.Now that it's hanging i just drive the tractor inside the gazebo and simply push it out of the way.Easy!