Hi Jamie,
Some of the things mentioned may be only cosmetic, but it good to be sure.
The 225 amp is output from the welder, but less than 50 amp at the input. For small jobs you may not reach that load, so a 50 amp outlet from the power panel will be enough. You may need a longer power cord to reach outside.
The next thing is lots of practice. Hope this helps.
Welder
Hi Jamie,
Some of the things mentioned may be only cosmetic, but it good to be sure.
The 225 amp is output from the welder, but less than 50 amp at the input. For small jobs you may not reach that load, so a 50 amp outlet from the power panel will be enough. You may need a longer power cord to reach outside.
The next thing is lots of practice. Hope this helps.
Don