Frank,
One 28" x 20" piece of 18G sheet metal, then cut, shaped, wrapped around and attached; then brazed bronze & copper on the areolas and belly button. Next time I'll use a wider piece of metal because I found that I didn't really have enough material to do justice to her derriere. I'll have to burn a bigger hole in the tree stump (thanks Pam).
Thanks for the tip on the hammer. I actually rigged a shaping hammer of my own using an oxy cylinder cap, and I wrapped the steel handle with rope and duct tape. I'll try that on my other hammers.
Thanks for the complement. It means a whole lot to me!
J.R.
Frank,One 28" x 20" piece
Frank,
One 28" x 20" piece of 18G sheet metal, then cut, shaped, wrapped around and attached; then brazed bronze & copper on the areolas and belly button. Next time I'll use a wider piece of metal because I found that I didn't really have enough material to do justice to her derriere. I'll have to burn a bigger hole in the tree stump (thanks Pam).
Thanks for the tip on the hammer. I actually rigged a shaping hammer of my own using an oxy cylinder cap, and I wrapped the steel handle with rope and duct tape. I'll try that on my other hammers.
Thanks for the complement. It means a whole lot to me!
J.R.