ArtMetal

John Dach
john@MLCE.net
web site: http://www.MLCE.net
I have seen "kits" at boat shows for sale that will "weld" just about any metal to just about any other type of metal. Different rods for different metal combinations. Not cheap but not bank breaking either.

The other thing that MAY work, depending on how much stress si going to be put on the bond area, is using a product called LEXOR (I think that is the name, I know it starts with an L and has an X in it). It is a caulking compound for windows and other needs, is water clear, is a solvent base and is TOUGH. If you ever use it to put in a car windshield, you will destroy the car getting the stuff off. VERY sticky, not terribly expensive and available at your local hardware store.

John Dach