ArtMetal

lI posted this picture to make sure that I could do it again. Big hint, remember to click on the cameran not the little picture. At anyrate, two years ago I made two birdbaths from copper. One pedestal was made from cheap short wire fencing that we were throwing away. I saw the roll of it sitting on the picnic table and decided that it needed a copper birdbath on top of it. Being on a roll, I started anouther one without knowing what I would use as the base. I settled on black plastic pipe I found at a Loews. I drilled some holes in the front of it and hammered in some heavy copper wire as decorative rivets.