Re: Making Spoon Rings

ArtMetal
Bramblebush


Follow UpsPost FollowupBramblebush ForumsFAQ

Posted by Stu Tarlowe on September 24, 19100 at 22:03:06:

In Reply to: Re: Making Spoon Rings posted by sara kirk on September 05, 1999 at 14:48:39:

Sherry...

It's a year since you asked about spoonrings, but I just stumbled onto this site, and if you're still in need of advice, I can help.

I made and peddled "Authentic Hippie Spoonrings", "Custom-Fitted While-U-Wait" for many years. sara kirk is right; you don't need a torch; and you don't even need sterling silver spoons (or forks, or whatever); silver plate works quite well.

You do need a ring mandrel and a soft-face hammer. You also need a block of wood with a groove that will accomodate the smaller half of the mandrel.

If you still don't know how to bend 'em, e-mail me and I'll describe the technique.

Cheers! Stu Tarlowe STarlowe@earthlink.net


Follow Ups:


Follow UpsPost FollowupBramblebush ForumsFAQ