Re: Pexto & Wilcox circle shear #536


Follow UpsPost FollowupBramblebush ForumsFAQ

Posted by scott baylor on April 23, 19100 at 20:47:55:

In Reply to: Pexto & Wilcox circle shear #536 posted by Bud Offutt on March 30, 19100 at 08:10:50:


Bromel's book is a good ref. for how to set up machine.

If the machine is complete. under the machine there is

a large nut to loosen, then the two adj. screws are

to the bottom right front, and back. You want a slight

forward attitude. Then try it, once working tighten the lower nut. The wheels should be just touching one another but

not binding. That adj. is made at the far upper right,

above the crank handle. Questions? email me.


Follow Ups:

Follow UpsPost FollowupBramblebush ForumsFAQ