Re: Casting Copper

Posted by John Dach on February 15, 19100 at 02:17:14:

In Reply to: Re: Casting Copper posted by Craig Smyres on February 14, 19100 at 01:21:52:

Never poured pure copper but this may change (just talked with a local brewery onwer and he has TONS of copper plate from some mashing tuns {tanks} and wants to make some stuff from it). I did check into this as a client was considering some copper colored castings and I was going to do it in "contact copper" as it is supposed to pour and work much better than pure copper but has the same color as pure copper. I would be interested to hear what you come up with if you proceed with the pure copper. If I work with any I will post the results.

Kiddie pool dip ehh Bruce. I will have to consider this but I might have to use the duck/goose pool (after I clean it out!!).

John Dach

Follow Ups: