Posted by Jack Davis on April 09, 1998 at 09:12:00:

In Reply to: clear spray finish posted by Steve Bronstein on April 08, 1998 at 21:43:00:

I have been finishing bronze parts with an acrylic laquer for quite some time that is purchase from Sherwin Williams commercial line, but maybe you need an acrylic enamel which they should have also in gallon size or larger......Most larger companys carry industrial application finishes, that you won't normally find on the shelf, but have in the back room or can order........................................Imagemaker

Follow Ups:

• Re: clear spray finish Doug Parrish 4/11/98 (2)
  • Re: clear spray finish steve bronstein 4/12/98 (1)
    • Re: clear spray finish Rich 12/02/98 (0)