Re: Topic: Oil and Beeswax Formula


Follow UpsBramblebush ForumsFAQ

Posted by Craig Carson on March 31, 1998 at 08:25:40:

In Reply to: Re: Topic: Oil and Beeswax Formula posted by Steve Bronstein on November 17, 1997 at 22:43:44:

I tried the beeswax, boiled linseed oil and turpintine mixture, but when the mixture cooled down, it turned into a fairly hard block of wax. I used a torch to spred the wax over the piece and was wondering if this will affect the protective properties of the coating. Also the finish is very suseptive to fingerprints, will this stop when the wax has had a few days to set-up.

Follow Ups:

Follow UpsBramblebush ForumsFAQ