Re: Mullers: fact or fiction


Bramblebush ForumsFAQ

Posted by arbe on August 31, 19100 at 08:22:58:

In Reply to: Re: Mullers: fact or fiction posted by Jesse Brennan on July 18, 19100 at 16:24:13:

I built a muller more than 10 years ago when I went to resin bonded sand. Basis of the machine is a disc plow blade set on a vertical axle. The rim is a welded steel band 6 inches high to keep the sand in and to form the driving band. Power is to the flat rim through a single drive belt from a vertical 1 hp motor. Inside the disc are two flat plow blades to throw the sand up under a flat cast iron pulley wheel. The weight of the wheel can be adjusted by sliding a weight up or down the support arm. The disc spin at 35/40 RPM and handles 20 litres/4 gallons of sand at one time. Hope this helps. arbe

Follow Ups:

    Bramblebush ForumsFAQ