Re: Aluminum shrinkage?

ArtMetal
Bramblebush


Bramblebush ForumsFAQ

Posted by John Odom on April 10, 19100 at 07:29:15:

In Reply to: Aluminum shrinkage? posted by Jack Fisher on April 09, 19100 at 17:30:12:

Try about 1/8" per foot. That is about 1.0%, not 10%. Deprnding on the part and alloy your results may vary.

Sounds like a good project. Where are you located?

John Odom, in Ooltewah, TN .


Follow Ups:


    Bramblebush ForumsFAQ