Re: Home casting

ArtMetal
Bramblebush


Bramblebush ForumsFAQ

Posted by joew on March 05, 19100 at 02:10:37:

In Reply to: Home casting posted by Chuckman on March 03, 19100 at 17:49:43:

Do the following:

Make your wax pattern. Attach a sprue. Surround the pattern with a thick coating of investment. Put the mold into an oven at 1000 degrees F until the heat has soaked completely through the mold. Take it out of the oven and pour melted metal into the cavity.

Hmmmm.... did I forget anything? : )


Follow Ups:


    Bramblebush ForumsFAQ