Re: Novice:Sandcasting questions

ArtMetal
Bramblebush


Bramblebush ForumsFAQ

Posted by Kevin on October 15, 1999 at 15:42:34:

In Reply to: Re: Novice:Sandcasting questions posted by John Lyons on August 07, 1998 at 23:54:41:

Thanks for the info. I learned of Pyrimid Products a number of years ago but lost the information that I had on their products. I'm going to send for it again. Thanks for the number. I've done some melting of scrap aluminum with the Dave Gingery charcoal furnace. It works fairly well and was very cheap to make. But it won't do brass or anything that needs a higher temp. Lindsey publications has alot of metal working books. If you want the address and number I'd be happy to get that to you. Have you found out anything new since the web page was first started ?

I've been working on biulding an electric furnace here. It is easier for me to work with because of the gas situation here. I would have to use propane.

Thanks again for the information !!!

Feel free to write

Kevin


Follow Ups:


    Bramblebush ForumsFAQ