Posted by Chip Jones on January 13, 1999 at 15:46:50:

I have found information about most equipment needed for a foundry, however, I'm lost when looking for a slurry mixer and a tool to load the sand between dips. Are there pre-fab equipment sources for this purpose and if so who do I call.

Thanks! Chip

Follow Ups:

• Re: Topic:Slurry mixers and sanders John Dach 1/15/99 (0)
• Re: Topic:Slurry mixers and sanders Robert Oblon 1/13/99 (0)

Bramblebush ForumsFAQ